Skip to content

Speakers

Powered Hot Spot PA5XD

This product has been discontinued. ULTRA HIGH POWER ONE-PIECE PA SYSTEM/POWERED MONITOR. The Powered Hot Spot Monitor is a product like no other. The Powered Hot Spot delivers an ear shattering 100 watts of power! The Powered Hot Spot, like the original Hot Spot, delivers high power, in a small, portable, lightweight design, about the size of a shoe box. The Powered Hot Spot contains one of Galaxy Audio's NEOLITE Neodymium driver. Inside the Powered Hot Spot is a power amp that can deliver 100 watts continuously @ 8 ohms, 150 watts @ 4 ohms. The Class H power supply configuration utilizes four output transistors, a low voltage pair and a high voltage pair. Its low voltage transistors are active with any signal. When demand on the amp exceeds the low voltage transistors' capabilities, the high voltage transistors kick in and provide additional power. The result is an amplifier that runs cooler, weighs less, is smaller and more efficient. The Powered Hot Spot contains two inputs, a ¼” and an XLR, each with its own volume control. Both inputs feature the ability to accept microphone or line level input, which maximizes the signal-to-noise ratio of virtually any input source. Best of all, you don't have to flip a switch to distinguish between microphone or line level, the Powered Hot Spot automatically adjusts itself with our SmartALIC circuitry. Also, the Powered Hot Spot features a 3-band equalizer to allow you to adjust the equalization for optimum sound. As well as the built-in compressor/limiter circuitry controls the amplifier gain, acting like a compressor on transient signal and a “brick wall” limiter on signals that continuously exceed a predetermined limit. This results in an apparent 6 dB increase in SPL without distortion. That's twice the sound pressure! The Powered Hot Spot produces a maximum SPL of 114dB. That's more sound pressure level than most sound systems twice it size! The Powered Hot Spot is constructed of a black fire-retardant styrene with a black cast aluminum faceplate/grille, which is attractive and act as a heat dissipation device. With the Powered Hot Spot containing the lightweight NEOLITE Neodymium driver and a 150 watt power amplifier, it is truly “POUND FOR POUND THE WORLD'S MOST POWERFULL SOUND SYSTEM”!

More Details

Powered Micro Spot DC MSPADC

This product has been discontinued. The Powered Micro Spot, like the original Powered Hot Spot, delivers high power, but in a more compact  package that's smaller than a football.  Designed to be used anywhere sound reinforcement is needed, the Powered Micro Spot's universal power supply will accept AC sources ranging from 90 volts to 250 volts, 50 or 60 Hz. Where AC is not available, the Powered Micro Spot-DC can be powered by 12volts DC through it's DC input port.   Weighing only 4.82 pounds, the Powered Micro Spot delivers a clean 30 watts of power to its internal 4.5" speaker and can reach SPL levels of 99 dB. XLR and 1/4" inputs respectively accept microphone and line level signals. The Powered Micro Spot also features a 2-band equalizer and built-in compressor/limiter circuitry that controls the amplifier's gain, acting like a compressor on transient signals and a “brick wall” limiter on signals that continuously exceed a predetermined limit. This results in an apparent 6 dB increase in SPL without distortion. That's twice the sound pressure!  With the included mounting hardware, the Powered Micro Spot can be permanently mounted to a wall or ceiling, or conveniently mounted atop a microphone stand for portable use.  The Powered Micro Spot works great in many applications. The powered Micro Spot is diverse enough for live sound , church, fixed installation, etc. It's compact and lightweight enough to take anywhere.

More Details

Powered Micro Spot MSPA

This product has been discontinued. The Powered Micro Spot, like the original Powered Hot Spot, delivers high power, but in a more compact package that's smaller than a football.  Designed to be used anywhere sound reinforcement is needed, the Powered Micro Spot's universal power supply will accept AC sources ranging from 90 volts to 250 volts, 50 or 60 Hz.  Weighing only 4.82 pounds, the Powered Micro Spot delivers a clean 30 watts of power to its internal 4.5" full range speaker and can reach SPL levels of 99 dB. XLR and 1/4" inputs respectively accept microphone and line level signals. The Powered Micro Spot also features a 2-band equalizer and built-in compressor/limiter circuitry that controls the amplifier's gain, acting like a compressor on transient signals and a “brick wall” limiter on signals that continuously exceed a predetermined limit. This results in an apparent 6 dB increase in SPL without distortion. That's twice the sound pressure!  With the included mounting hardware, the Powered Micro Spot can be permanently mounted to a wall or ceiling, or conveniently mounted atop a microphone stand for portable use. The unit's case is constructed of tough fire retardant styrene with a black cast aluminum faceplate.

More Details

Chameleon Micro Spot MSPM

This product has been discontinued. The Chameleon Micro Spot VC, originally designed for courtroom applications, is ideal for fixed installation applications such as paging systems, boardrooms, etc. Standard features of the Chameleon Micro Spot include a universal wall/ceiling bracket and a 70volt transformer with 6 screw taps of .9w, 1.9w, 3.8w, 7.5w, 15w, 30w, and a 16 ohm tap. The 16 ohm tap is a transformer bypass that allows the user to step around the transformer and use the Chameleon Micro Spot as a 100 watt speaker. Its integral volume control allows the user to easily have more control over the volume. The bracket allows the Chameleon Micro Spot to be mounted to any wall, ceiling, table, or other surface. The Chameleon Micro Spot features the proprietary Galaxy Audio NEOLITE neodymium 5-inch driver with a Ferrofluid cooled voice coil that reduces both power compression and distortion.

More Details

Micro Spot w/ Volume Control MSVC

This product has been discontinued. The Micro Spot VC (volume control) is based on the popular Galaxy Audio Hot Spot, the original personal monitor. The Micro Spot VC comes standard with a volume control located on the front of the unit that allows the user to independently adjust their own volume without affecting the other monitors. A stand mount bracket allows it to be mounted to any microphone stand. The Micro Spot VC features the proprietary Galaxy Audio NEOLITE neodymium 5-inch driver with a Ferrofluid cooled voice coil that reduces both power compression and distortion. The Micro Spot VC, with a bandwidth focused at the vocal frequency range of 300Hz-15kHz, is perfect for all speech applications. The compact size of the Micro Spot VC makes it a great solution for eliminating stage clutter and the task of lugging bulky floor monitors in and out of the gig. Pound for pound, inch for inch, the Micro Spot VC ranks among the world's loudest and clearest loudspeakers. Ruggedly built to Galaxy Audio's exacting standards, the Micro Spot VC is unsurpassed in power handling and sonic fidelity among loudspeakers of similar size and weight.

More Details

Hot Spot w/ Volume Control HSVC

This product has been discontinued. The HOT SPOT monitor series has been the world’s number one personal monitor since it's invention in 1977. There are two basic concepts that have led to the continued success of the HOT SPOT. The first concept was to bring the monitor closer to the performer. Second, was to create a monitor that projects mid/high range frequencies; a frequency tailoring that Galaxy calls controlled bandwidth. By bringing the monitor closer, the stage volume can be reduced, which, in turn, helps clean up the front of house mix. Its integral volume control allows the performer to have more control over his/her volume and to hear the other musicians on stage. The HOT SPOT's frequency range is tailored for the mid/high range (150Hz-18kHz). As live performers know, the mid/high range carries all the vocal clarity. The HOT SPOT is most effective, because of the fact it can be placed closer to the performer, its use of controlled bandwidth, and most importantly, its two NEOLITE high efficiency high power drivers! The HOT SPOT features two of Galaxy’s new NEOLITE neodymium drivers, each rated at 100 watts continuous. This gives the HOT SPOT its rating of 200 watts @ 16 ohms. The HOT SPOT cabinet is constructed of black high impact ABS and has an attractive cloth grill. The back of the unit features two ¼” input jacks. One serves as the speaker's input; another makes it possible to link multiple HOT SPOTS. The HOT SPOT's front mounted seven position volume control offers 18dB of adjustability (in 3 dB increments). All HOT SPOTS have a built in stand mount which allows them to be easily mounted to a microphone stand. SA-1 Stand adaptors included.

More Details

Hot Spot HSRG

This product has been discontinued. The HOT SPOT monitor series has been the world’s number one personal monitor since it's invention in 1977. There are two basic concepts that have led to the continued success of the HOT SPOT. The first concept was to bring the monitor closer to the performer. Second, was to create a monitor that projects mid/high range frequencies; a frequency tailoring that Galaxy calls controlled bandwidth. By bringing the monitor closer, the stage volume can be reduced, which, in turn, helps clean up the front of house mix. Its integral volume control allows the performer to have more control over his/her volume and to hear the other musicians on stage. The HOT SPOT's frequency range is tailored for the mid/high range (150Hz-18kHz). As live performers know, the mid/high range carries all the vocal clarity. The HOT SPOT is most effective, because of the fact it can be placed closer to the performer, its use of controlled bandwidth, and most importantly, its two NEOLITE high efficiency high power drivers! The HOT SPOT features two of Galaxy’s new NEOLITE neodymium drivers, each rated at 100 watts continuous. This gives the HOT SPOT its rating of 200 watts @ 16 ohms. The HOT SPOT cabinet is constructed of black high impact ABS and has an attractive cloth grill. The back of the unit features two ¼” input jacks. One serves as the speaker's input; another makes it possible to link multiple HOT SPOTS. All HOT SPOTS have a built in stand mount which allows them to be easily mounted to a microphone stand. SA-1 Stand adaptor included.

More Details