Wireless Parts & Accessories
MREWD
Single and Dual Monitor Rack Mount Kit, includes 1 long rack ear, 2 short rack ear, 2 coupler plates, and assorted screws. The MREWD allows for racking a single or two wireless in-ear monitors systems or wireless mic systems in a 1U space. Works with PSE, DHX, CTS, AS-900, AS-1100, & AS-1400 systems.
Dual Rack Mount Kit MRE-1800D
RACK MOUNT DUAL MONITOR KIT FOR AS-1800 Mounts two AS-1800 transmitters side by side in one rack space Allows for Front Mounting the Antennas 1 Rack Space
19.69” BNC Cable & Connector Combo
This Includes: One Wire BNC Connector Cable (Part# CN-BNCPM) and One 19.69" (50 cm) RG58 Cable (Part# EXTBNC) for front mounting antenna.
Universal Power Adaptor AS-UA12-14.5
Universal Power Adaptor. The AS-UA12-14.5 supplies 12V DC at 1000mA to Our Wireless Microphone & Monitor systems such as the DHT, DHX, DHTRQUAD, DHXR4, PSE, ECM, ECD, EDX, AS-900, Galaxy Audio AS-1100 & AS-1800 using the common 5.5mm barrel plug with center positive. The universal AC power adaptor comes with 4 different AC plug adaptors, and will accept any input voltage from 100 to 240v AC, 50-60Hz, which means it will work in nearly every country on the planet. 12V DC 1000mA 5.5mm PLUG Converts Systems To Accept 230 VAC.
Wireless In-Ear Personal Monitors Parts & Accessories
MREWD
Single and Dual Monitor Rack Mount Kit, includes 1 long rack ear, 2 short rack ear, 2 coupler plates, and assorted screws. The MREWD allows for racking a single or two wireless in-ear monitors systems or wireless mic systems in a 1U space. Works with PSE, DHX, CTS, AS-900, AS-1100, & AS-1400 systems.
Dual Rack Mount Kit MRE-1800D
RACK MOUNT DUAL MONITOR KIT FOR AS-1800 Mounts two AS-1800 transmitters side by side in one rack space Allows for Front Mounting the Antennas 1 Rack Space
CN-BNCPM BNC Connector
CN-BNCPM Connector is used for front mounting antenna to rack ears. BNC jack connector only, extension cable (EXTBNC) needed. A BNC Cable and Connector Combo kit is available that includes the 19.69" (50 cm) Extension Cable and a single BNC Connector.
Wireless Microphones Parts & Accessories
MREWD
Single and Dual Monitor Rack Mount Kit, includes 1 long rack ear, 2 short rack ear, 2 coupler plates, and assorted screws. The MREWD allows for racking a single or two wireless in-ear monitors systems or wireless mic systems in a 1U space. Works with PSE, DHX, CTS, AS-900, AS-1100, & AS-1400 systems.
CN-BNCPM BNC Connector
CN-BNCPM Connector is used for front mounting antenna to rack ears. BNC jack connector only, extension cable (EXTBNC) needed. A BNC Cable and Connector Combo kit is available that includes the 19.69" (50 cm) Extension Cable and a single BNC Connector.
EXTBNC - 19.69” BNC Extension Cable
Standard 19.69" (50 cm) RG58 extension cable for front mounting antenna. Front mount connector (CN-BNCPM) needed. A BNC Cable and Connector Combo kit is available that includes the 19.69" (50 cm) Extension Cable and a single BNC Connector.
Wireless Mic Transmitters Parts & Accessories
HS-U3BK Uni Headset
This uni-directional headset comes standard with the ECM, PSE, TRC, DHT, DHX, CTS, & Traveler Headset Systems. It's comfortable wrap around design goes over both ears and helps ensure that this mic will stay in place. The HS-U3BK can be wired to work with transmitters made by Galaxy Audio®, Shure®, Sennheiser®, AKG®, and Audio Technica®, as well as most other brands of wireless microphone systems. Uni directional headset microphone Hooks over both ears
LV-U3BK
This uni-directional lavalier mic comes standard with the ECM, PSE, TRC, DHT, DHX, CTS, & Traveler Lavalier Systems. The LV-U3BK can be wired to work with transmitters made by Galaxy Audio®, Shure®, Sennheiser®, AKG®, and Audio Technica®, as well as most other brands of wireless microphone systems. Uni-Directional Lapel / Lavalier
HS13-UBK Headset
The HS13-UBK unidirectional wrap-around headset comes as a standard option with the EDX Headset System. It's comfortable wrap around design goes over both ears and helps ensure that this mic will stay in place. ● Uni-Directional ● Hooks Over Both Ears ● Standard with EDX
Wireless Accessories Parts & Accessories
HS-U3BK Uni Headset
This uni-directional headset comes standard with the ECM, PSE, TRC, DHT, DHX, CTS, & Traveler Headset Systems. It's comfortable wrap around design goes over both ears and helps ensure that this mic will stay in place. The HS-U3BK can be wired to work with transmitters made by Galaxy Audio®, Shure®, Sennheiser®, AKG®, and Audio Technica®, as well as most other brands of wireless microphone systems. Uni directional headset microphone Hooks over both ears
LV-U3BK
This uni-directional lavalier mic comes standard with the ECM, PSE, TRC, DHT, DHX, CTS, & Traveler Lavalier Systems. The LV-U3BK can be wired to work with transmitters made by Galaxy Audio®, Shure®, Sennheiser®, AKG®, and Audio Technica®, as well as most other brands of wireless microphone systems. Uni-Directional Lapel / Lavalier
HS13-UBK Headset
The HS13-UBK unidirectional wrap-around headset comes as a standard option with the EDX Headset System. It's comfortable wrap around design goes over both ears and helps ensure that this mic will stay in place. ● Uni-Directional ● Hooks Over Both Ears ● Standard with EDX
Assistive Listening Parts & Accessories
EB10
GALAXY AUDIO EB10 PROFESSIONAL DUAL DRIVER EARBUDS: Upgrading your earbuds can be a great improvement to your wireless monitor system or media player. The Galaxy Audio EB10 is a professional dual driver earbud system. It has two built-in transducers and a passive crossover in each ear bud. They provide Hi-Dynamics, Hi-Definition, and Low-Noise to yield accurate audio reproduction. The EB10 has a standard 3.5mm stereo jack, allowing it to be used with any brand of Wireless Personal Monitor or Digital Media Player. The Galaxy Audio EB10 incorporates dual performance drivers and built-in crossover. The EB10's lightweight ergonomic design assures excellent sound isolation and maximum comfort during periods of extended wear. The EB10 comes with a Silver Plated cable with a Gold Plated connector. The EB10 has a MAX Power Input of 150mW and a Sensitivity of 120 dB/mW. The EB10 has a cable over 4 feet long and the ear buds weigh 7g (0.25 oz; excluding cable). The EB10 includes zippered carrying case with a cleaning rod and three pairs of Silicon Sleeves (small, medium and large). Professional Dual Driver Earbuds Allows musicians to monitor their mix with full detail. Design assures excellent sound isolation and maximum comfort during periods of extended wear. Three different sized pairs of silicon sleeves are provided for best fit and sound isolation. Nylon Soft Case Included
EB6
The EB6 features a single driver delivering full frequency performance. The Galaxy Audio EB6 has a cable over 4 feet long and the earbuds weigh 6g (less than 0.25 oz; excluding cable). The EB6 in-ear wired single driver earphones include a durable plastic carrying case with three pairs of Silicon Sleeves (small, medium and large). Wideband Dyna Driver earbuds reproduce the full frequency range with natural mids, full highs, and rich bass. They allow musicians to monitor their mix with full detail. Three different sized pairs of silicon sleeves are provided for best fit and sound isolation. Ergonomic mechanical structure ensures long time, low fatigue use.
EB4
The EB4 are the standard Earbuds for the Galaxy Audio Wireless Personal Monitors. The EB4 includes three pairs of Silicon sleeves (small, medium, and large) for fit and comfortable use. The EB4 Earbuds have a standard 3.5mm stereo jack, allowing them to be used with any brand of Wireless Personal Monitor or MP3 Player. Stereo Personal Monitoring Earbuds Single Titanium Drivers High Fidelity with Extended Bass Light and Comfortable Aluminum Alloy Construction Durable Cable
