Single and Dual Monitor Rack Mount Kit, includes 1 long rack ear, 2 short rack ear, 2 coupler plates, and assorted screws. The MREWD allows for racking a single or two wireless in-ear monitors systems or wireless mic systems in a 1U space. Works with PSE, DHX, CTS, AS-900, AS-1100, & AS-1400 systems.
Dual Rack Mount Kit MRE-1800D
RACK MOUNT DUAL MONITOR KIT FOR AS-1800 Mounts two AS-1800 transmitters side by side in one rack space Allows for Front Mounting the Antennas 1 Rack Space
CN-BNCPM BNC Connector
CN-BNCPM Connector is used for front mounting antenna to rack ears. BNC jack connector only, extension cable (EXTBNC) needed. A BNC Cable and Connector Combo kit is available that includes the 19.69" (50 cm) Extension Cable and a single BNC Connector.
EXTBNC - 19.69” BNC Extension Cable
Standard 19.69" (50 cm) RG58 extension cable for front mounting antenna. Front mount connector (CN-BNCPM) needed. A BNC Cable and Connector Combo kit is available that includes the 19.69" (50 cm) Extension Cable and a single BNC Connector.
19.69” BNC Cable & Connector Combo
This Includes: One Wire BNC Connector Cable (Part# CN-BNCPM) and One 19.69" (50 cm) RG58 Cable (Part# EXTBNC) for front mounting antenna.
EXTBNC100 - 100’ BNC Extension Cable
100 foot, RG 58, BNC extension for front mounting antenna. Front mount connector (CN-BNCPM) needed. Can be used with the ANT-PDL.
EXTBNC50 - 50’ BNC Extension Cable
50 foot, RG 58, BNC extension cable for front mounting antenna. Front mount connector (CN-BNCPM) needed. Can be used with the ANT-PDL.
EXTBNC25 - 25’ BNC Extension Cable
RG 58 25-foot BNC extension cable for front-mounting antenna. Front mount connector (CN-BNCPM) needed. Can be used with the ANT-PDL wireless directional antenna.
Replacement BNC Antenna for use with Galaxy Audio AS-1400 Wireless Personal Monitors. Frequency Code: M 516-558 MHz
DC CHARGER: charges two body packs at once. Charges two body packs or handhelds at once Charger for AS-1500R, HH64, HH64SC, HH76, HH76SC, HH76W, HH76WSC & MBP76.
Replacement BNC Antenna for use with Galaxy Audio AS-1800 Wireless Personal Monitors. Frequency Codes: B2 538-554 MHz B3 554-570 MHz
BNC Antenna AS-ANTBNC
Replacement BNC Audio Antenna for use with Galaxy Audio Wireless Personal Monitors and Wireless Microphones. 2 Frequencies: Code D 584-607 MHz AS-ANT600B Code N 518-541 MHz AS-ANT525B
Universal Power Adaptor AS-UA12-14.5
Universal Power Adaptor. The AS-UA12-14.5 supplies 12V DC at 1000mA to Our Wireless Microphone & Monitor systems such as the DHT, DHX, DHTRQUAD, DHXR4, PSE, ECM, ECD, EDX, AS-900, Galaxy Audio AS-1100 & AS-1800 using the common 5.5mm barrel plug with center positive. The universal AC power adaptor comes with 4 different AC plug adaptors, and will accept any input voltage from 100 to 240v AC, 50-60Hz, which means it will work in nearly every country on the planet. 12V DC 1000mA 5.5mm PLUG Converts Systems To Accept 230 VAC.
Power Supply PS-13.5-.35.5
Microphone power supply for AS-900T, AS-1100T, AS-1400T, VESR, VSCR, ECDR, EDXR, ECMR, PSER, DHTR, & DHXR. 13.5 Volt 300 mA- 5.5 mm PLUG
BNC Antenna AS-ANT900BNC
Replacement BNC Personal Monitor Antenna for use with Galaxy Audio AS-900 Wireless Personal Monitors
GALAXY AUDIO EB10 PROFESSIONAL DUAL DRIVER EARBUDS: Upgrading your earbuds can be a great improvement to your wireless monitor system or media player. The Galaxy Audio EB10 is a professional dual driver earbud system. It has two built-in transducers and a passive crossover in each ear bud. They provide Hi-Dynamics, Hi-Definition, and Low-Noise to yield accurate audio reproduction. The EB10 has a standard 3.5mm stereo jack, allowing it to be used with any brand of Wireless Personal Monitor or Digital Media Player. The Galaxy Audio EB10 incorporates dual performance drivers and built-in crossover. The EB10's lightweight ergonomic design assures excellent sound isolation and maximum comfort during periods of extended wear. The EB10 comes with a Silver Plated cable with a Gold Plated connector. The EB10 has a MAX Power Input of 150mW and a Sensitivity of 120 dB/mW. The EB10 has a cable over 4 feet long and the ear buds weigh 7g (0.25 oz; excluding cable). The EB10 includes zippered carrying case with a cleaning rod and three pairs of Silicon Sleeves (small, medium and large). Professional Dual Driver Earbuds Allows musicians to monitor their mix with full detail. Design assures excellent sound isolation and maximum comfort during periods of extended wear. Three different sized pairs of silicon sleeves are provided for best fit and sound isolation. Nylon Soft Case Included
The EB6 features a single driver delivering full frequency performance. The Galaxy Audio EB6 has a cable over 4 feet long and the earbuds weigh 6g (less than 0.25 oz; excluding cable). The EB6 in-ear wired single driver earphones include a durable plastic carrying case with three pairs of Silicon Sleeves (small, medium and large). Wideband Dyna Driver earbuds reproduce the full frequency range with natural mids, full highs, and rich bass. They allow musicians to monitor their mix with full detail. Three different sized pairs of silicon sleeves are provided for best fit and sound isolation. Ergonomic mechanical structure ensures long time, low fatigue use.
The EB4 are the standard Earbuds for the Galaxy Audio Wireless Personal Monitors. The EB4 includes three pairs of Silicon sleeves (small, medium, and large) for fit and comfortable use. The EB4 Earbuds have a standard 3.5mm stereo jack, allowing them to be used with any brand of Wireless Personal Monitor or MP3 Player. Stereo Personal Monitoring Earbuds Single Titanium Drivers High Fidelity with Extended Bass Light and Comfortable Aluminum Alloy Construction Durable Cable
Replacement Sleeves for EB10 Earbuds. 3 pair in each pack. Available in Small, Medium, or Large.
Replacement Sleeves for EB6 Earbuds. 3 pair in each pack. Available in Small, Medium, or Large.
Replacement Sleeves for EB4 Earbuds. 5 pair in each pack. Available in Small, Medium, or Large.
RUBBER EAR CUP-BLUE Ear cup has rubber to wrap around ear for a more comfortable fit.