Skip to content

DHTRQUAD (UHF)

THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE DHXR4. The DHTRQUAD offers the same great features as the DHT system, with 4 receivers...

View More Details

Find a Dealer

from
DHTRQUAD (UHF) Callout DHTRQUAD (UHF) Callout

THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE DHXR4.

The DHTRQUAD offers the same great features as the DHT system, with 4 receivers in a single rack space chassis. The DHTRQUAD offers 4 independent receivers, each with Auto Scan, IR Sync, and 120 selectable channels. The DHTRQUAD has a built in antenna combiner and power distributor. The DHTRQUAD has 4 independent XLR outputs (one for each channel) as well as mixed output, allowing the user to submix the microphones on the DHTRQUAD and come out of one XLR or ¼" output. The DHTRQUAD can be used with any 64 or 76 Series Handheld or Body Pack transmitter, in addition to our wireless shock mount base, the SM-W76.

  • 300' Range
  • 120 Selectable Channels
  • UHF Frequency
  • Single Rack Mount Kit Included
  • Auto Scan
  • LCD Display
  • Frequency with Channel Group Selector
  • AF/RF Indicators
  • IR Sync
  • Diversity Antennas
  • Squelch Adjustment
  • XLR/¼" Output

SM-W76

THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE SM-W77.

The SM-W76 features 16 selectable channels and operates off of 2 AA batteries. 60Hz - 16kHz, 10m W RF out, SNR 102dB (a), THD < 1%. The SM-W76 will work with the TRC, DHT, and DHTRQUAD receivers and will accept any standard XLR type input. The SM-W76 acts as a shock mount base for a goose neck microphone.

  • 16 Selectable Channels
  • XLR Mic Input
  • Powered From 2 AA Batteries
  • On/Off Switch w/ Low battery LED

Works with DHTR, TRCR & DHT QUAD

LV-U3BK

This uni-directional lavalier mic comes standard with the ECM, PSE, TRC, DHT, DHX, CTS, & Traveler Lavalier Systems. The LV-U3BK can be wired to work with transmitters made by Galaxy Audio®, Shure®, Sennheiser®, AKG®, and Audio Technica®, as well as most other brands of wireless microphone systems.

  • Uni-Directional
  • Lapel / Lavalier

HS-U3BK Uni Headset

This uni-directional headset comes standard with the ECM, PSE, TRC, DHT, DHX, CTS, & Traveler Headset Systems. It's comfortable wrap around design goes over both ears and helps ensure that this mic will stay in place. The HS-U3BK can be wired to work with transmitters made by Galaxy Audio®, Shure®, Sennheiser®, AKG®, and Audio Technica®, as well as most other brands of wireless microphone systems.

  • Uni directional headset microphone
  • Hooks over both ears

19.69” BNC Cable & Connector Combo

This Includes:
One BNC Connector (Part# CN-BNCPM) and
One 19.69" (50 cm) RG58 Cable (Part# EXTBNC) for front mounting antenna.

MC-SC

Spring Mic Clip

Antenna Distributor ANT-DISTDC

Antenna Distribution System expands wireless microphone systems only, by splitting one pair of antennas to allow up to four single channel receivers to use the same antennas. 3dB gain compensates for any insertion loss and increases receive signal range (up to 275ft). Low-loss 50 ohm BNC connectors for mounting antenna. Includes rack ears for mounting rack space (1RU) Distributes the antenna for up to 4 Wireless Microphone Systems (PSE, CTS, and DHX Series). BNC connectors, single rack space, combines power for up to four wireless receivers as well.
Note: Only works with wireless microphone receivers. Does NOT work with In-Ear systems.

  • Combines Antennas for up to 4 mic receivers
  • Four DC outputs eliminate individual power supplies
  • 500MHz-900MHz Range
  • Built in Antenna Booster
  • Increase receiver signal rans up to 275 ft more
  • 3dB Gain Compensaton
  • 19" Rack Space

DHTRQUAD (UHF) Specifications

Audio Output Level(+/-30kHz deviation, 1kHz tone) XLR connector (into 600 Ohms load) -12dBV ¼" connector (into 3kOhms load) -18dBV
Output ImpedanceXLR connector 200Ohms ¼" connector 1kOhms
XLR outputImpedance balanced
Pin 1Ground (cable shield)
Pin 2Audio
Pin 3No Audio
Sensitivity-93dBm for 30dB SINAD, typical
Image Rejection>90dB
Dimensions1.7" x 8.3" x 6.3" (44mm H x 212mm W x 160mm D)
Weight31.75oz (900 g)
Power Requirements12-18 V dc at 400mA, supplied by external power supply

Manuals

Manual ( pdf - 3.02 MB )
Cut Sheet ( pdf - 0.66 MB )
Code D & L Frequency Chart ( pdf - 0.09 MB )

Product Images

This product has not been rated yet.

Reviews

  • This item has not been rated yet.