Included Yoke Bracket and hardware kit for NSPA. Will allow for mounting to wall or mic stand. Mounts the NSPA to a wall or stand Available in black Hardware Kit Included
Included Yoke Bracket and hardware kit for MS5 and MSPA5. Will allow for mounting to wall or mic stand. Mounts any MS5 or MSPA5 to a wall or stand Available in black Hardware Kit Included
Today, there is a need to know just how loud your surroundings really are. The CM-170 is an affordable IEC 61672-1 Type II SPL meter that competes with some of the best SPL meters on the market. The CHECK MATES are inexpensive tools that everybody working in loud environments should own. Windscreen and protective case are included with the CHECK MATE models. The CHECK MATE series SPL (Sound Pressure Level) meters, first introduced in early 2003, allow musicians, sound contractors, and others to measure SPL in decibels (dB). A decibel is defined as the unit for measuring relative loudness of a sound. We have expanded our line from one CHECK MATE SPL Meter to four products in the category. We have sold thousands of units to working musicians, DJs, police departments, sound contractors, racetracks, etc... The CM-170 is the latest in the line of Galaxy Audio SPL Meters. The CM-170 is similar to our CM-160 model, except that it has Data Logging with Clock feature, Fast/Slow Time Weighting, and Electronic Calibration. The CM-170 comes complete with a carry case, windscreen, USB cable, and software for computer. Freq. Range: 20Hz - 8kHz Freq. Weighting: A/C Fast/Slow Time Weighting Data Logging with Clock USB Mini Interface Includes Software and USB Cable for Charging IEC 61672-1 Type II Range 30 - 130dB Accuracy ± 1.4dB Electronic Calibration
Today, there is a need to know just how loud your surroundings really are. The CHECK MATES are inexpensive tools everybody should own. The CM-140 and CM-150 meet the same IEC 651 Type 2 standards of SPL meters that cost 5 times as much or more. Windscreen and battery are included with each of the CHECK MATE models. The CHECK MATE series SPL (Sound Pressure Level) meters, first introduced in early 2003, allow musicians, sound contractors, and others to measure SPL in decibels (dB). A decibel is defined as the unit for measuring relative loudness of a sound. We have expanded our line from one CHECK MATE SPL Meter to four products in the category. We have sold thousands of units to working musicians, DJs, police departments, sound contractors, racetracks, etc... Mini Size Low Cost High Performance MAX/MIN Function Level Range Display AC Signal Output Resolution 0.1dB IEC 651 Type II, ANSI S1.4 Type II
Today, there is a need to know just how loud your surroundings really are. The CHECK MATES are inexpensive tools everybody should own. Windscreen and battery are included with each of the CHECK MATE models. The CHECK MATE series SPL (Sound Pressure Level) meters, first introduced in early 2003, allow musicians, sound contractors, and others to measure SPL in decibels (dB). A decibel is defined as the unit for measuring relative loudness of a sound. We have expanded our line from one CHECK MATE SPL Meter to four products in the category. We have sold thousands of units to working musicians, DJs, police departments, sound contractors, racetracks, etc... Mini Size Low Cost High Performance MAX Function Level Range Display Resolution 0.5dB
Protective Slip Cover for TV10 Mesh front so audio can pass thru while covering unit. Easy access to controls & power input Access side can be unzipped and velcroed open Convenient side pockets for storage Works two ways! Can be turned 180º
Over time, all SPL meters lose their calibration. The CM-C200 is an SPL meter calibrator. The CM-C200 meets IEC 60942 2003 Class 2 and ANSI S1.40-1984 standards. The CM-C200 can calibrate 1", 1/2" and 1/4" microphone capsules at 94dB and 114dB. The calibrator is designed to calibrate SPL Meters with a microphone diameter of 1/4", 1/2" and 1". The CM-C200 will work with any of the CheckMate SPL Meters and many other brands. The CM-C200 has a test tone at 1kHz at both 94dB and 114dB. The CM-C200 includes 2 adaptors a protective zipper pouch and manual. Accurate and simple to use Calibration levels of 94dB and 114dB at 1kHz Fits 1", 1/2" and 1/4" diameter microphones Conforms to IEC 60942 2003 Class 2 and ANSI S1.40-1984 Weight: approx 0.41lbs (186.4g) (including battery)
The CRICKET Polarity/Continuity tester is great for sound contractors, musicians, DJs, and many others. Polarity, should it become reversed, can play havoc with a sound system. If two sources are emitting the same electrical or acoustic tone (frequency), and one of those sources is in a state of inverted polarity, those tones, when combined at a given point, will cancel each other. This severely alters the sound of a system. Polarity can be reversed while soldering cables, adding components to a sound system, reversing 'Banana' plugs, or replacing a component in a speaker cabinet improperly, to name a few instances. The purpose of the CRICKET is to test the polarity of a sound system each time it is used to insure it is working properly. Galaxy Audio's battery powered CRICKET Polarity/Continuity Test Set makes it easy to determine whether every component in an audio system from patch bay to console to speakers is in or out of polarity. The CRICKET tests balanced and unbalanced cables of up to 2,000 feet in length. It will drive a “snake” (even one with transformers), and indicate which of a microphone's XLR connector pins is hot. The CRICKET can also plug directly into a speaker cabinet and drive the components. A glance at the CRICKET's red and green LED's can save hours of troubleshooting. No wonder it's an indispensable tool for sound system owners, operators, installers, and sound rental companies. The CRICKET Polarity Tester is a two-piece unit ('Send' & 'Receive'). The Send unit generates a 'pulse', which is sent through the speaker, cable, microphone, or the device being tested. The Receive unit interprets that pulse and indicates if that pulse is positive or negative. The bottom of each unit has a quick reference guide on how to understand the readings given. The CRICKET Polarity Test Set is easy to use, necessary to own, and not a lot of money. The CRICKET is suggested for anybody working with sound systems. Checks continuity and polarity 1/4" TRS and XLR in/out Tests speakers, mics, cables and wireless systems Tests mixers and signal processors for polarity inversions Internal speaker for testing mic polarity Internal mic for testing speakers High level output for testing miles of cable Battery test on Receive module saves troubleshooting time "The Galaxy Audio Cricket is a life saver- allowing simple or very complex systems to be checked for phase all along the signal path. The Cricket has been it my toolkit for over 20 years and during that time has checked and helped me phase multiple amplifier stacks for Megadeth, White Zombie, Stephen Stills, Bon Jovi, E Street Band, Paul Simon and The Who. We have also used it to solve the "mysteries"of rental equipment and house PA's sometimes finding simple cabling faults which had remained undiscovered for years. When all your "stuff" works together, it works it's best." - Michael Kaye, Touring Guitar Technician
The JIB/PA50 is designed to meet the demands of the school, commercial, industrial, and pro audio installations. Its compact and lightweight form allow for a wide range of applications that need noiseless amplification. The JIB/PA50 has a 50 Watt (2x25W) Energy-Star rated Class D amplifier in only a quarter rack width design. This design allows for the amplifier to be placed where conventional amplifiers cannot be. The three stereo inputs, microphone input, and separate line and mic gain adjustments allow for connecting the JIB/PA50 to a projector, wireless microphone receivers, and other sound sources quickly. The Energy-Star amplifier automatically goes into standby mode if no input signal is sensed for 20 minutes, dropping power consumption to only 0.8W, saving energy and money, while extending the JIB/PA50 life span. Great for classrooms, boardrooms, conference rooms, and small systems Output 50 watt (25 watts RMS per channel) Three stereo inputs, two on RCA connectors and one on 3.5mm stereo jack Balanced sub-line level input summed to both channels Stereo input can be controlled externally with 10K pot Energy-efficient amplifier
+24V Phantom Power 7 Input/4 Channel Headphone Output with Volume Multiple Outputs Metal Construction Portable - Runs off of 2 AA Batteries* High Gain/Wide Dynamic Range The Multi Mixer (JIB/MM) is a great tool for live sound, home recording, field recording, audio/video, and many others. This unit features 4 inputs; Chan 1&2: XLR/1/4" combo w/ 20dB pad, Chan 3: Stereo RCA and Stereo 1/8" mini (3.5mm), Chan 4: Stereo RCA. Each channel has its own volume control. The JIB/MM also features numerous outputs; XLR, 1/4", stereo RCA, and a stereo headphone output with a volume control. The “Mic/Line switch” located between the XLR and 1/4" Balanced Mono Outputs allows for selecting either a “Mic Level” Balanced Mono Output or a “Line Level” Balanced Mono Output. The JIB/MM will run off of 2 AA batteries for about 15 hours or an optional DC power supply (JIB/UA4.5-14). The JIB/MM will supply +24V phantom power to microphones. The JIB/MM is great for: Adding inputs to an existing mixer by creating a sub-mix of two or more sources before sending the signals to the main mixer or powered speaker. Serving as a sophisticated cable adapter that not only adapts the connector type but also provides the correct impedance with adjustable level control. Serving as the main mixer for solo or duo acts as well as AV presentations. As a mixer for rehearsals when its impractical to set up the entire PA. Interfacing pro audio gear with consumer audio gear. Battery operation allows remote location use where AC power is unavailable. As an emergency back-up mixer to have along just in case. Great for Use in Churches, Schools, and Bands.
Ideal for Musicians, Contractors, and Live Sound Tests 6 Different Connector Types Internal Micro Processor Tests Cable 200 Times Per Second To Detect Intermittent Problems Easy to Read Pass/Fail Indicator Quick and Easy to Use Tests "Y" Cables Tests Adapter Cables Cable Tester (JIB/CT) was designed to test cables quickly and simply. The CT tests 6 different types of cables, XLR, 1/4", RCA, 1/8", Speakon, and DIN (Midi). The CT features a specially designed microprocessor, which tests a cable 200 times per second. (A simple 'Pass/Fail' indicator lights up when you plug each side of the cable into the CT and select the number of conductors of the cable.) Great for Use in Churches, Schools, and Bands.
Splits a single monitor feed to as many as four POWERED HOT SPOTS (or other powered monitors) Splits a single headphone feed to multiple headphones Balanced TRS inputs and outputs
Combines (sums) two stereo CD or tape players into one mono (XLR or 1/4 inch) output Frees mixer channels Phantom block on the XLR prevents phantom power from reaching CD/tape players connected to the RCA jacks
Add an additional microphone to the POWERED HOT SPOT (or other powered monitor) when all inputs are in use. Permits phantom power to go to both microphones if available from the console.
Splits a microphone to two different inputs, like a POWERED HOT SPOT (or other powered monitor) and a console. Phantom block circuitry prevents interference from two different phantom power sources.
Saddle Bag Sand/Water Bag SDB40
The Saddle Bag Sand/Water Bag is designed to help improve the stability of speaker, keyboard, mic, lighting stands and many other types of stands. Also great as a boom counterweight. The Saddle Bag is constructed of a durable reinforced vinyl. When filled with sand (not included) the Saddle Bag weighs approximately 40 lbs and 25 lbs when filled with water. The filled Saddle Bag will help stabilize a top- heavy stand. Works great on keyboard, speaker, mic, lighting, and many other types of stands. Great for: bands, churches, theater, broadcast, recording & video production Dual wing design Nylon handle with clip May be filled with sand or water Helps protect equipment from damage and keeps stands upright and stable Sand can be acquired at most home improvement centers, concrete supply warehouses, landscaping supply houses or a sand blasting supply company. Tip: Coarse dry commercial sand works best. Use a funnel for faster fills. Equipped with large 1-inch inner diameter plugs for ease of filling. WARNING 1. We are not responsible for any damage caused by the use or misuse of the bag. 2. The water bag should not be used near electrical wiring. 3. Only dry sand should be used in a dry bag. 4. Water should not be left in the bag for long periods. 5. Do not subject the bag to freezing weather when filled with water. 6. The bag is not intended as a flotation device.
Life Saver Sand/Water Bag LSR38
The Galaxy Audio Life Saver is a unique equipment stand stabilizer that may be used in a variety of ways in Audio, Video, Lighting, and Theatre applications. Any mic or speaker stand may become unstable because of a top-heavy center of gravity, a boom extended laterally, or simply because the stand is set on an uneven surface. When filled with Sand or Water the Life Saver provides enough weight at the bottom to stabilize most mic and speaker stand applications. The doughnut shape of the LSR38 ensures that the Life Saver will stay on the base of the stand, even if the stand is pushed or bumped. The LSR38 weighs 38 lbs. when filled with sand, and 22 lbs. when filled with water. The durable reinforced vinyl material and easy-fill water tight design allow the user to transport the Life Saver empty, and fill with water on location. The LSR38 dimensions are: 16" O.D. x 6" I.D. x 3" Thick. The Life Saver will pay for itself the first time it prevents your expensive mics or speakers from hitting the floor. (Sand/water not included) May be filled with sand or water Protects mics and speakers from damage Helps keep microphone, speaker and lighting stands upright Sand/Water not included Unique doughnut shape keeps bag on the stand
SST-45 Speaker Stand
Metal Construction Tripod Legs Extends up to 81" Holds up to 70lbs Pole Diameter 1 3/8" (35.30 mm)
SST-35 Speaker Stand
Tripod Legs Extends up to 76" Holds up to 70 lbs Pole Diameter 1 3/8" (35.30 mm)
Traveler Speaker Stand SST-TV5
Metal Clamp 170 pound load capacity 40"-86" height range Height-Security System with Stop Bolt and Locking Screw
TV5X Carry Case
Mesh front so audio can pass thru while covering unit. Easy access to controls & power input Access side can be unzipped and velcroed open
TV5i Carry Case
Mesh front so audio can pass thru while covering unit. Easy access to controls & power input Access side can be unzipped and velcroed open Convenient side pockets for storage
Traveler Tote Bag BAGTV
Galaxy’s TRAVELER TOTE BAG holds one TRAVELER AS-TV8. The TRAVELER TOTE BAG also has storage for additional accessories. TRAVELER TOTE BAG is constructed of high quality heavy duty water resistant nylon. TRAVELER TOTE BAG comes with a detachable shoulder strap, removable inner dividers, wheels and a retractable handle.
Protective Slip Cover for TV8 Mesh front so audio can pass thru while covering unit. Easy access to controls & power input Access side can be unzipped and velcroed open Convenient side pockets for storage Works two ways! Can be turned 180º
Stand Alone Transmitter AS-TXRM
The Audio Link Transmitter will transmit audio signal to any of our Traveler® Series Speakers. It is designed to take a mixed signal and send it to the speakers wirelessly. The AS-TXRM can also act as the mixer; it’s easy with a XLR, ¼", and RCA inputs between two channels, each having their own volume control. So a microphone, CD player, iPod®, etc can be inserted and transmitted to your speakers. The AS-TXRM can be rack mounted or placed on a table top. 96 selectable channels LCD display Channel selector UHF Frequency RF and AF indicator Volume control
Universal Power Adaptor JIB/UA4.5-14
Galaxy Audio is proud to introduce a new problem solver to its Audio Solutions line, the Universal Power Adaptor. The JIB/UA4.5-14 supplies 4.5v DC, at 1A to many of the new products in our Jacks In The Box line as well as most CD and MP3 players using the common 4mm barrel plug with center positive. The UPA comes with 4 different AC plug adaptors, and will accept any input voltage from 100 to 240v AC, 50-60Hz, which means it will work in nearly every country on the planet.
Dual Port USB Charger 12VDC or 24VDC input 2 power outputs (1) 2.1A port for higher amp charged devices like iPad® and (1) 1A port for smaller USB devices. Simultaneously charge two devices Fuse protected USB charging from your car or truck power port. Compatible with iPad®/iPhone®/iPod®and other USB devices such as mobile phones, MP3's and digital cameras.