Over 35 Years of Family Ownership Find us on facebook
Loading
PA6SR Built in Wireless receiver
ULTRA HIGH POWER ONE-PIECE PA SYSTEM/POWERED MONITOR

model with PA6S· 2-Way Speaker System
· 6.5" Neodymium Woofer
· 1.5" Titanium Dome Tweeter
· Built-in Wireless Receiver
· 170 Watt Amplifier
· 3 Inputs (2-XLR/1/4" Combos, One 1/8")
· Mounts to Any Mic Stand
· Integrated Handle, Mounting Points for Mic Boom & Bracket
· Built In Compressor/Limiter
· XLR Pass Thru On Channels 1 & 2


PA6S

Features & Options

 

Great Features

  • The new PA6SR includes a wireless receiver and a convenient mic stand insert on the bottom of the unit. This allows a quick setup on top of a mic stand, with the PA6SR angled upward for accurate vocal monitoring.
  • The included mic stand adaptor insures a more stable and secure placement on any mic stand.
  • Molded-in yoke bracket points. With the optional yoke bracket assembly the PA6SR can be mounted to
    a wall or ceiling, or attached to a mic stand and angled in any direction.
  • Microphone boom mount on top of the PA6SR eliminates the need for a second mic stand for your
    microphone. (Requires optional hardware).
  • Integrated handle into the top of the enclosure.
  • Built in Compressor/Limiter prevents output distortion.
  • -20dB pad switches on each XLR input allow high-level signals without distortion.
  • 3 band EQ (High, Mid, Low) to adjust the sound to what you want to hear.
  • Pass through on each channel acts as a built in splitter to send signals to a mixer snake or another PA6S.
  • Two way speaker system: 6.5" neodymium high power woofer and 1.5" high efficiency Neolite tweeter
    allows for wider frequency response.
  • 170 watt Class D amplifier.
  • Light weight: Innovative speaker and amplifier designs actually allowed us to reduce the weight of
    the PA6SR from its predecessors, while improving the performance.

    Transmitters

SPEAKER SECTION
Woofer: One Galaxy Audio SW6.5, 6.5" NEOLITE Neodymium Woofer
Tweeter: One ST1.5 ferro fluid cooled 1.5" NEOLITE Neodymium Titanium Dome Tweeter
Nominal impedance: 4 ohms
Power handling capacity: 170 watts

ENCLOSURE
Enclosure Materials: Fire retardant styrene
Color: Black
Dimensions: 7.75" x 11.75" x 6.75" (197 mm x 298 mm x 171 mm)
Net weight: 6.4 lbs. (2.9 kg)

AMPLIFIER SECTION
Rated Power: 170 watts @ 4 ohms, 180 watts Dymamic Power
Equalization: Three band center detent
Lo: ± 12 dB peak/dip at 200 Hz
Mid: ± 12 dB peak/dip at 2 kHz
Hi: ± 12 dB shelving at 10 kHz
Sensitivity (1 Watt @ 1 meter): 98 dB (1 kHz octave band)
Frequency response: 80 Hz–18 kHz
Maximum SPL @ clip: 118 dB
Total Harmonic Distortion: <0.5% @ 4 ohms
Input connections: Two 1/4" Balanced/Unbalanced Two XLR 24V Phantom PWR One 1/8" Stereo Line In
Output connections: Two XLR Thru Outputs One 1/4" Preamp Output
Indicator LEDs: POWER, CLIP & COMPRESSOR
Power Requirements; Domestic: 120 VAC 60Hz
Export: 230VAC 50Hz
Safeguards: Short circuit current limiting. Short circuit foldback limiting. Thermal short circuit protection

Wireless Reciver
Oscillation type: PLL synthesized control OSC
Adjustable frequency: Pre-programmed max. 96 switchable channels
Dynamic range: 110 dB
T. H. D.: Less than 0.5%
Squelch: Tone key and noise lock dual-squelch
Frequency response:70 Hz ~ 16 kHz (wireless)
Operating range: 160 - 230 feet (50 ~ 70 M) (open field) with built-in antenna
Antenna mode: Diversity
Sensitivity: 4µV @ 30 dB
Display status: LCD indicator displays channel or frequency
Channel select: SET, UP, DOWN keys
Carrier frequency range: 640 ~ 664 MHz

Included with the PA6SR
Built-In Wireless Receiver
SA-1 Stand Adaptor
Power Cord
Manual
Optional Accessories:
AS-TVMBPAS-TVMBP
Body Pack Transmitter
  • 96 Selectable Channels
  • Channel Selector
  • LCD Display
  • Belt Clip
  • 3-Bar Battery Life Indicator
  • Mute Switch
  • Functions from 2 AA Batteries (14 hours)
  • 4.4 oz. (170g)

Click here for more info

 

AS-HSAS-HS
UNI- DIRECTIONAL
HEADSET
  • Uni Directional Headset
  • Freq. Response: 50Hz - 18kHz
Click here for more info
AS-LVAS-LV
UNI- DIRECTIONAL
LAPEL / LAVALIER
  • Uni Element
  • Lapel / Lavalier
  • Freq. Response: 100Hz - 16kHz
Click here for more info

AS-TVHHAS-TVHH
Handheld Microphone Dynamic Capsule

  • 96 Selectable Channels
  • Channel Selector
  • LCD Display
  • Dynamic Capsule
  • Built-in-Antenna
  • 3-Bar Battery Life Indicator
  • Hi/Low-Mute Switch
  • Functions from 2 AA Batteries (14 hours)
  • 8.3 oz. (280g)

Click here for more info

 

AS-TVHHCAS-TVHHC
Handheld Microphone Condenser Capsule

  • 96 Selectable Channels
  • Channel Selector
  • LCD Display
  • Condenser Capsule
  • Built-in-Antenna
  • 3-Bar Battery Life Indicator
  • Hi/Low-Mute Switch
  • Functions from 2 AA Batteries (14 hours)
  • 8.3 oz. (280g)

Click here for more info

 

AS-TXRMAS-TXRM
Table Top/Rack Mount Transmitter

  • 96 Selectable Channels
  • Channel Selector
  • RF and AF indicator
  • Volume Control
  • LCD Display

Click here for more info

 

Boom mount hardwareMic Boom Adaptor Part: MBA Click here to go to the MBA page.

*Mounts to the top of the PA6S, PA6SR, OR HS7
*Allows mic boom to be mounted on top of the unit.
*Works With 3/8" & 1/2" mic booms

Click Here For Boom Mounting Instructions PDF 97KB
Click Here For Boom Mounting InstructionsWORD.doc 344KB

LSR38
LIFE SAVER Sand/Water Bag

more Info

MICROPHONE, SPEAKER, PA & EQUIPMENT SAVER
Creates a safer and more stable stand for those top heavy loads.
image
SDB40
Saddle Bag

more Info

LIGHTING, SPEAKER, PA & EQUIPMENT SAVER
Creates a safer and more stable stand for those top heavy loads.
Saddle bag image Saddle bag image
Mounting options with the following brackets
PA6S mounting options
SAYBSA Mic Stand Yoke Bracket Kit
Part#
SAYBSA10

$19.99 each Plus S&H
Select Color Before Ordering:
Image DownloadSAYBSA10-0 image
SAYBRF Wall Yoke Bracket Kit
Part#
SAYB10

$19.99 each Plus S&H
Select Color Before Ordering:
Image Download
SAYB10-0

PA6SR

The PA6SR has all of the great features of the PA6S, plus a built in wireless receiver. The wireless option can be used in many ways:
1.) With a handheld mic or a body pack transmitter with a headset/lavalier mic. The PA6SR will receive signals from one of the optional transmitters. This is very convenient for performers, teachers, or A/V presentations.
2.) The receiver option may be used in conjunction with our AS-TXRM table top/rack mount transmitter. This allows a signal to be wirelessly transmitted to the PA6SR from a remote source.

Whether you are transmitting your church service to an overflow or cry room, a DJ needing to get sound in a remote location, transmitting your monitor mix to the stage, or using the receiver to pick up your wireless microphone signal, you will love the convenience of not having to run the extra cable to patch signals.

With over 30 years of building compact PA systems, Galaxy Audio built the PA6S/PA6SR with the user in mind. It is designed to cover a multitude of applications and provide the power to handle nearly any situation. A new amplifier, new 2 way speaker system, lighter weight, more power output, and great built in features make the PA6S the best sounding, lightest, and most powerful compact PA system on the market.

 

Amplifier/Pre Amp
The PA6SR has a built in 170 watt amplifier designed to handle the most demanding audio situations. This high tech Class D amplifier produces plenty of power to cover a wide variety of applications. This design allows the PA6SR to function both as a stand-alone PA system and as a high-powered vocal monitor to cut through loud stage volumes. For larger gigs that require more coverage, you may simply patch from the Preamp Output to the main house PA, while using the PA6SR as your onstage monitor.

The PA6SR also features a built in 18dB Compressor/Limiter circuit with Compressor and Clip LEDs. The Compressor acts to smooth out transient peaks in the signals, thus improving overall sound quality and increasing apparent volume. The Limiter helps protect the woofer and tweeter from being damaged by amplifier distortion. The Clip LED indicates when a reduction in volume is recommended.

 

NEOLITE Neodymium

NEOLITE 6.5" Woofer
The NEOLITE 6.5" Woofer features a 3.4oz Neodymium magnet mounted on an ABS plastic basket. The high excursion cone and thick surround allow for low frequencies to be produced cleanly. The NEOLITE 6.5" has a frequency range of 50-8kHz with a sensitivity of 88dB, 1W/1M.

6.5" Woofer

NEOLITE 1.5" Titanium Dome Tweeter
The 1.5" Neolite Titanium Dome Tweeter features fluid cooling and a strong neodymium magnet. The great mid range quality of this driver ensures clear, intelligible vocals. It has the capability of producing 60 watts of screaming mids and highs. This tweeter has a frequency response of 1kHz-20kHz and a magnet weight of 33.5 grams.

ST1.5" Tweeter

 

 

where to Buy
 
LINKS TO OTHER PA6S SYSTEMS:
link to PA6S
Link to PA6SR
Link to PA6SRSK9
Link to PA6SRVK9
Link to PA6SRHK9
 
features



Hot Spot Series > NSPA | MS5 | HS7 | PA6S | All Hot Spots
FCC Consumer Alert

FCC Consumer Alert for Wireless Microphones (U.S.)

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change.

For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones

Specifications subject to change without notice.