Loading

HOT SPOT

DISCONTINUED
PRODUCT

SEE UPDATED HOT SPOT HERE

COMPACT VOCAL MONITOR
 

HOT SPOT REGThe HOT SPOT monitor series has been the world’s number one personal monitor since it's invention in 1977. There are two basic concepts that have led to the continued success of the HOT SPOT. The first concept was to bring the monitor closer to the performer. Second, was to create a monitor that projects mid/high range frequencies; a frequency tailoring that Galaxy calls controlled bandwidth. By bringing the monitor closer, the stage volume can be reduced, which, in turn, helps clean up the front of house mix. Its integral volume control allows the performer to have more control over his/her volume and to hear the other musicians on stage.

The HOT SPOT's frequency range is tailored for the mid/high range (150Hz-18kHz). As live performers know, the mid/high range carries all the vocal clarity. The HOT SPOT is most effective, because of the fact it can be placed closer to the performer, its use of controlled bandwidth, and most importantly, its two NEOLITE high efficiency high power drivers!

The HOT SPOT features two of Galaxy’s new NEOLITE neodymium drivers, each rated at 100 watts continuous. This gives the HOT SPOT its rating of 200 watts @ 16 ohms. The HOT SPOT cabinet is constructed of black high impact ABS and has an attractive cloth grill. The back of the unit features two ¼” input jacks. One serves as the speaker's input; another makes it possible to link multiple HOT SPOTS. All HOT SPOTS have a built in stand mount which allows them to be easily mounted to a microphone stand. SA-1 Stand adaptor included.

SPECIFICATIONS

HOT SPOT REG (HSRG)
Frequency response: 250 Hz –15 kHz
Power handling capacity: 200 Watts
Sensitivity: (1 watt @ 1Meter) 92 dB (1 kHz octave band)
Maximum SPL: (200 watts @ .5 meter): 126 dB
Speaker complement: Two NEOLITE Neodymium, ferro fluid cooled 5 -inch drivers .86 lbs (.39 kg)
Nominal impedance: 16 ohms
Input connection: One Speakon® style input & Two ¼ -inch jacks wired in parallel
Enclosure Materials: High impact ABS plastic
Color: Black case with cloth covered ABS grille
Included: SA- 1 spun aluminum stand adaptor allows HOT SPOTS to be used on KM style mic stands.
Dimensions: 6.75-inches x 10.94-inches x 6-inches (171 mm x 278 mm x 152 mm)
Net weight: 4.5 lbs. (2.04 kg)
Shipping weight: 6.1 lbs. (2.8 kg)

 

 

DOWNLOADS
Hi-Res Images Back
Stand Mounted
Manual HOT SPOT Manual PDF 278 KB
CUT SHEET HOT SPOT VC
102 KB
BRACKET INSTRUCTIONS Instructions PDF
51 KB
Polar charts Polar Chart
363 KB
ACCESSORIES

Black vinyl strap handle

TRANSPORT tote bag
STAND
LIFE SAVER
(SC-2) Cable 1/4 inch plugs

 

 

 
ARCHITECT AND ENGINEER SPECIFICATIONS
The loudspeaker shall be a controlled bandwidth (150Hz - 18kHz) system offering two Neodymium,
ferrofluid cooled 5-inch drivers with 7.4-ounce magnet structures. The loudspeaker shall be capable of handling 200 watts continuous. Nominal impedance shall be 16 ohms. Input connection shall be two ¼- inch phone jacks. The enclosure shall be constructed of rugged ABS plastic and feature a cloth covered ABS grille. The cabinet shall be available in black with a black bezel. An integrated flange shall be provided to accommodate microphone stand mounting. An optional handle shall be offered. Dimensions shall be 11 inches wide (279 mm), 7 inches high (178 mm), and 5.25 inches deep (133 mm). The system’s weight shall be 4.5 lbs (2.04 kg). The loudspeaker system shall be the GALAXY AUDIO HOT SPOT.
Specifications subject to change without notice.
Updated 6-1-07