The AS-1800 is designed with features for
the professional. The body pack receiver
is set up for a king. With 150mW's of
output to the ear buds, the AS-1800R is
sure to be plenty loud for any environment.
The receiver has a squelch adjustment, stereo/mono switch, LCD
display, button lock, and a Magnesium Alloy Construction.
Transmitter Main Frame Size: EIA STANDARD ½ U Channels: 32 Channels / 640 Selectable Frequencies Frequency Stability: ±0.0005%, Phase Lock Loop frequency control Available Frequencies : B2 538~554 MHZ
B3 554~570 MHZ Modulation Mode: FM stereo modulation Output Power: 30mW or 100mW Operating Range: 300' (100M) typical (in open space) Oscillation: PLL synthesized
Spurious Rejection <-60dBm Maximum Deviation Range: ±68KHz Band Width: 16MHz S/N: >105dB T.H.D.: < 0.7% @ 1KHz Frequency response: 45Hz~18KHz±1dB Audio Input: Line level X 2, XLR and ¼" Combo jack Audio Output: 6.3mmφ unbalanced jack X 2 Dimensions: 1.7" x 8.2" x 8.1" (44mm (H) x 209mm (W) X 206mm (D) Weight: 2.3 lbs 1.04kg
AS-1800-4 Band Pack System
The 1800 Band Pack Systems makes it easy for any band to
Get Personal. The system Includes four receivers and one
transmitter. It is designed to get the whole band wireless in
one package. The AS-1800-4 will allow a band to send
one stereo mix to 4 individuals (additional receivers
may be purchased). Additional transmitters may be
purchased at a later date to add mixes.
SINGLE RACK EAR KIT FOR AS-1800: Center mount. 2 pieces w/ screws
Part# MRE1800Click here for more info
Mounts one 1800 Receiver
Allows for Front Mounting Antenna
1 Rack Space
BNC CONNECTOR: For front mounting antenna to rack ears. Connector only, extension cable needed
Part# CN-BNCPM
Click here for more info
BNC Connection
Allows for Front Mounting Antenna
BNC EXTENSION CABLE: Extension for front mounting antenna. 50cm long. Front mount connector needed
Part# EXTBNCClick here for more info
2 BNC Connectors
Extension Cable for Front
Mounting Antenna
Length: 18” (50cm)
Universal Power Adapter. The AS-UA12-14.5 supplies 12V DC at 1000mA to Our Wireless Microphone & Monitor systems such as the DHT, TRC, PSE, ECM, ECD, AS-900, AS-1000, AS-1100 & AS-1500 using the common 4.5mm barrel plug with center positive. The (UPA) comes with 4 different AC plug adapters, and will accept any input voltage from 100 to 240v AC, 50-60Hz, which means it will work in nearly every country on the planet. Part#AS-UA12-14.5Click here for more info
Bodypack Receiver Channels: 32 Channels / 640 Selectable Frequencies Frequency Stability: ±0.0005%, Phase Lock Loop frequency control Available Frequencies : B2 538~554 MHZ
B3 554~570 MHZ Modulation Mode: FM stereo modulation Operating Range: 300' (100M) typical (in open space) Oscillation: PLL synthesized Sensitivity: 6dBμV, S/N>60dB at 25 deviation (mono) Band Width: 16MHz Max. Deviation Range: ±68KHz S/N: >105dB T.H.D.: <0.7% @ 1KHz Frequency response: 45Hz~18KHz±1dB Stereo Separation: ³45dB (at 1KHz) Output Connector: 3.5mm (Ø) stereo earphone connector Output Power: 150mW at 1KHz (THD1%) Battery: AA X 2 Current Consumption: 185mA typical Battery Current / Life: About 7 hours Dimension: 4.25" x 2.6" x .87" (108mm(H) X 66mm(W) X 22mm(D)) Weight: .35 lbs (.16kg)
The Mixed Mono feature allows performers to adjust the balance of the Left and Right audio signals sent from the transmitter right on the body pack.
With Mixed Mono; - the performers can have their vocals in Input 1 and the band mix in Input 2 and adjust the volume of each independently to create their own personal mix, or - you can send two different monitor mixes from the board so each performer can decide which mix they want to hear on their belt pack.
Hi-Res Images
DOWNLOADS
Optional EB6
SINGLE DRIVER EAR BUD w/CASE:
The EB-6 features a single driver delivering full frequency performance. The EB-6 has a chord over 4 feet long and the ear buds weigh 6g (less than 0.25 oz; excluding cable). The EB-6 includes durable plastic carrying case with three pairs of Silicon Sleeves (small, medium and large). System part#AS-1806
Sensitivity: (@ 1 kHz) 114 dB/mW Frequency Response: 20 ~ 20kHz Transducer Type: Dynamic Impedance: 16 Ohms Distortion: Less than0.3% Cord Length: 59" with 3.5mm stereo plug Net Weight: .21oz. (6g) (excluding cable)
Hi-Res Images
DOWNLOADS
Optional EB10 PRO DUAL DRIVER EAR BUD w/ CASE:
The EB-10 features dual drivers with a passive crossover; one to deliver low frequencies and one to deliver the high frequencies. The EB-10 has a MAX Power Input of 150mW and a Sensitivity of 120 dB/mW. The EB-10 has a chord over 4 feet long and the ear buds weigh 7g (0.25 oz; excluding cable). The EB-10 includes zippered carrying case with a cleaning rod and three pairs of Silicon Sleeves (small, medium and large). System part#AS-1810
AS-1800 System Frequency Range and Transmitter Output Level Band: UHF Frequency Range:B2 538~554 MHZ
B3 554~570 MHZ Transmitter Output Power: 30mW or 100mW Operating Range: Under Typical Conditions 300' (92m) Note: actual range depends on RF signal absorption, reflection, and interference Frequency Stability: ±0.0005%, Phase Lock Loop frequency control Total Harmonic Distortion: < 0.7% @ 1KHz Signal to Noise: >105dB Maximum Deviation Range: ±68KHz Operating Temperature: Range 14ºF to 122ºF (-10 Cº to +50 Cº) Note: battery characteristics may limit this range
The Mixed Mono feature allows performers to adjust the balance of the Left and Right audio signals sent from the transmitter right on the body pack.
With Mixed Mono; - the performers can have their vocals in Input 1 and the band mix in Input 2 and adjust the volume of each independently to create their own personal mix, or - you can send two different monitor mixes from the board so each performer can decide which mix they want to hear on their belt pack.
FCC Consumer Alert for Wireless Microphones (U.S.)
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change.
For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones
AS-1800-4
