The AS-1100 packs an amazing punch. The transmitter has stereo XLR/¼" inputs,
headphone output, and LCD display which
displays the channel and input level. The
Receiver has an LCD with channel, battery level,
and RF/AF indicator. The AS-1100 is perfect
for anyone looking for their first system or to upgrade to the next level.
The 1100 Band Pack Systems makes it easy for any band to
Get Personal. The system Includes four receivers and one
transmitter. It is designed to get the whole band wireless in
one package. The AS-1100-4 will allow a band to send
one stereo mix to 4 individuals (additional receivers
may be purchased). Additional transmitters may be
purchased at a later date to add mixes.
Transmitter Max Audio input level: +6dBV Gain Adjustment Range: 40dB Input Impedance: 100KΩ Dimensions: 1.5" x 8.3" x 3.78" (38mm H x 212mm W x 96mm D) Weight: 21oz. (605 g) Power Requirements: 12-18 V dc at 300mA supplied by external power supply XLR input: Impedance balanced Pin1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio
Bodypack Receiver Audio Output Level: 100mW Sensitivity: -94dBm for 30dB Image Rejection: >55dB Dimensions: 3.74" x 2.6" x 1" (95mm H x 65mm W x 25mm D) Weight: 3.5oz (100 g) without batteries Power Requirements: 2 (AA)size alkaline or rechargeable batteries Battery Life: About 5 hours
Hi-Res Images
DOWNLOADS
Optional EB6
SINGLE DRIVER EAR BUD w/CASE:
The EB-6 features a single driver delivering full frequency performance. The EB-6 has a chord over 4 feet long and the ear buds weigh 6g (less than 0.25 oz; excluding cable). The EB-6 includes durable plastic carrying case with three pairs of Silicon Sleeves (small, medium and large).
Sensitivity: (@ 1 kHz) 114 dB/mW Frequency Response: 20 ~ 20kHz Transducer Type: Dynamic Impedance: 16 Ohms Distortion: Less than0.3% Cord Length: 59" with 3.5mm stereo plug Net Weight: .21oz. (6g) (excluding cable)
Hi-Res Images
DOWNLOADS
Optional EB10
PRO DUAL DRIVER EAR BUD w/ CASE:
The EB-10 features dual drivers with a passive crossover; one to deliver low frequencies and one to deliver the high frequencies. The EB-10 has a MAX Power Input of 150mW and a Sensitivity of 120 dB/mW. The EB-10 has a chord over 4 feet long and the ear buds weigh 7g (0.25 oz; excluding cable). The EB-10 includes zippered carrying case with a cleaning rod and three pairs of Silicon Sleeves (small, medium and large).
DUAL RACK MOUNT TRAY FOR two AS-900T or two AS-1100T: Will hold two Receivers in a single rack space. Will also hold DHTR, TRCR, & PSER
Part#MRTD/P/TClick here for more info
Mounts two Receivers
1 Rack Space
SINGLE RACK EAR KIT FOR AS-900 & AS-1100: 2 pieces w/ screws
Part# MRE900/1100Click here for more info
Mounts one AS-900 or one AS-1100 Receiver
Allows for Front Mounting Antenna
1 Rack Space
DC CHARGER: charges two body packs at once CHARGER FOR AS-1500R, HH64, HH64SC, HH76, HH76SC, HH76W, HH76WSC & MBP76.
Part# WMC-CGR Click here for more info
BNC CONNECTOR: For front mounting antenna to rack ears. Connector only, extension cable needed
Part# CN-BNCPM
Click here for more info
BNC Connection
Allows for Front Mounting Antenna
BNC EXTENSION CABLE: Extension for front mounting antenna. 50cm long. Front mount connector needed
Part# EXTBNCClick here for more info
2 BNC Connectors
Extension Cable for Front
Mounting Antenna
Length: 18” (50cm)
Universal Power Adapter. The AS-UA12-14.5 supplies 12V DC at 1000mA to Our Wireless Microphone & Monitor systems such as the DHT, TRC, PSE, ECM, ECD, AS-900, AS-1000, AS-1100 & AS-1500 using the common 4.5mm barrel plug with center positive. The (UPA) comes with 4 different AC plug adapters, and will accept any input voltage from 100 to 240v AC, 50-60Hz, which means it will work in nearly every country on the planet. Part#AS-UA12-14.5Click here for more info
CASE: Holds up to 5 Body Pack Transmitters and/or Receivers. Construction: Plastic. Part# AS-CASEREC
FCC Consumer Alert for Wireless Microphones (U.S.)
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change.
For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones
