The AS-1100 packs an amazing punch. The transmitter has stereo XLR/¼" inputs,
headphone output, and LCD display which
displays the channel and input level. The
Receiver has an LCD with channel, battery level,
and RF/AF indicator. The AS-1100 is perfect
for anyone looking for their first system or to upgrade to the next level.
|
|
AS-1100 SYSTEM
AS-1106 WITH EB6 UPGRADE
AS-1110 WITH EB10 UPGRADE
- Single Rack Mount
- Included
- 300’ Range
- UHF Frequency
- 120 Selectable Channels
- Ear Buds
|
 |
AS-1100T
- Transmits in Stereo or Mono
- Light Up LCD Display
- Channel Number and Frequency
- 120 Selectable Channels
- XLR/¼” Combo Input
- AF L/R Indicator
- RF Output
- 10 mW
|
 |
Transmitter
Max Audio input level: +6dBV
Gain Adjustment Range: 40dB
Input Impedance: 100KΩ
Dimensions: 1.5" x 8.3" x 3.78" (38mm H x 212mm W x 96mm D)
Weight: 21oz. (605 g)
Power Requirements: 12-18 V dc at 300mA supplied by external power supply
XLR input: Impedance balanced
Pin1 Ground (cable shield)
Pin 2 Audio
Pin 3 No Audio
AS-1100-4 Band Pack System
The 1100 Band Pack Systems makes it easy for any band to
Get Personal. The system Includes four receivers and one
transmitter. It is designed to get the whole band wireless in
one package. The AS-1100-4 will allow a band to send
one stereo mix to 4 individuals (additional receivers
may be purchased). Additional transmitters may be
purchased at a later date to add mixes.
 Included:
Antenna
Rack Ears
Power Supply
Ear Buds
AA Batteries
Manual
AS-1100R Receiver
- LCD Display with Backlight
- Headphone Output Volume Control
- 4 Bar Battery Life Indicator
- RF and AF Indicator
- 100 mW Headphone Output
- 2 AA Batteries
- Ear Buds Included
- 80 mW Audio Output
- 3.5 oz (100 g)
|
 |
Bodypack Receiver
Audio Output Level: 100mW
Sensitivity: -94dBm for 30dB
Image Rejection: >55dB
Dimensions: 3.74" x 2.6" x 1" (95mm H x 65mm W x 25mm D)
Weight: 3.5oz (100 g) without batteries
Power Requirements: 2 (AA)size alkaline or rechargeable batteries Battery Life: About 5 hours
Images |
DOWNLOADS |
| Hi-Res Images
|
AS-1100R |
CUT SHEET
MANUAL |
Optional EB6
SINGLE DRIVER EAR BUD w/CASE:
The EB-6 features a single driver delivering full frequency performance. The EB-6 has a chord over 4 feet long and the ear buds weigh 6g (less than 0.25 oz; excluding cable). The EB-6 includes durable plastic carrying case with three pairs of Silicon Sleeves (small, medium and large). System part# AS-1106 |
 |
Sensitivity: (@ 1 kHz) 114 dB/mW
Frequency Response: 20 ~ 20kHz
Transducer Type: Dynamic
Impedance: 16 Ohms
Distortion: Less than0.3%
Cord Length: 59" with 3.5mm stereo plug
Net Weight: .21oz. (6g) (excluding cable)
Optional EB10
PRO DUAL DRIVER EAR BUD w/ CASE:
The EB-10 features dual drivers with a passive crossover; one to deliver low frequencies and one to deliver the high frequencies. The EB-10 has a MAX Power Input of 150mW and a Sensitivity of 120 dB/mW. The EB-10 has a chord over 4 feet long and the ear buds weigh 7g (0.25 oz; excluding cable). The EB-10 includes zippered carrying case with a cleaning rod and three pairs of Silicon Sleeves (small, medium and large). System part# AS-1110 |
 |
Sensitivity: (@ 1 kHz) 120 dB/mW
Frequency Response: 20 ~ 18kHz
Armatures: Dual Balanced (Single Hi/Single Low) with passive crossover
Impedance: 22 Ohms
Distortion: Less than 0.3%
Max Input Power: 150mW
Connector: Gold plated 3.5mm phone, stereo
Cord Length: 55 " (140cm)
Net Weight: .25oz. (7g) (excluding cable)
Accessories: Stylish carrying case, Cleaning Rod, Three pairs of Silicon sleeves (small, medium and large)
AS-1100 System
Frequency Range and Transmitter Output Level
Band: UHF
Frequency Range: 655 MHZ and 679 MHZ
Transmitter Output Level: 10dBm
Operating Range: Under Typical Conditions 300' (92m)
Note: actual range depends on RF signal absorption, reflection, and interference
Audio Frequency Response: +/-3dB 60Hz~16KHz
Total Harmonic Distortion: +/-30KHz deviation 1KHz tone <1%
Dynamic Range: >90dB A-weighted
Operating Temperature: Range 14ºF to 122ºF (-10 Cº to +50 Cº)
Note: battery characteristics may limit this range
| |
